Lightning Hybrids

New Lightweight Accumulators

2010-07-14T16:28:00.000-07:00

LIGHTNING HYBRIDS INTRODUCES LIGHTWEIGHT HYDRAULIC ACCUMULATORS

Colorado company produces tanks that are one-third the weight of standard tanks

Loveland, Colorado (July 12, 2010) — Lightning Hybrids Inc. (LHI) today introduced their lightweight high pressure composite bladder accumulators for hydraulic and other energy storage applications.

LHI’s composite tanks are one-third the weight of standard steel accumulators and offer significant energy savings due to weight reduction, increased safety due to a higher than standard burst pressure factor, and cost savings because they are easier and less expensive to ship and install since weight and mounting hardware is minimized

The patent-pending tanks were engineered by Lightning Hybrids specifically for use in the company’s HyPER Assist™ hydraulic hybrid vehicle application. Though it quickly became evident that there are other uses for these lightweight energy storage tanks such as emergency vehicles, forestry, agricultural and mining mobile equipment, among others.

“Our lightweight accumulators enhance the performance and efficiency of a variety of hydraulic systems,” stated Dan Johnson, LHI’s CEO, “in addition they add a higher dimension of safety and reliability over standard steel accumulators.”

Structural Composites Industries, a subsidiary of Worthington Cylinders, manufactures the accumulators for Lightning Hybrids. SCI is a world-recognized leader in high pressure tank manufacturing with an impeccable safety record and has managed the certifications required for these high-pressure tanks.

Lightning Hybrids’ accumulators are 6,000 PSI bladder accumulators and range in size from 10 to 30 gallons. They are a Type 3 tank and consist of an aluminum lining and a spun carbon fiber wrapped shell, encompassing a nitrogen gas compression bladder. LHI’s carbon fiber wrapped vessels are considerably lighter than their steel counterparts. For example, a 15 gallon accumulator weighs 115 pounds compared to 465 pounds for a steel accumulator. LHI’s accumulators are made and assembled in the U.S.A. Orders are currently being taken with delivery 60 days from receipt of order. For more information please call 1-800-223-0740 ext. 102.

REEL BIZ Video

2010-07-10T08:54:00.000-07:00

Check out some of our team interviewed for the Larimer County Workforce Center/Colorado Department of Labor and Employment:

http://www.betrproject.org/skilled-trades-and-technical-sciences/lightning-hybrids

NTEA Work Truck Show Pictures

2010-03-14T18:52:00.000-07:00

Pictures of our booth at the National Truck Equipment Association's Work Truck Show - March 10 to 12, 2010.

New Video

2010-03-14T18:51:00.001-07:00

Click Here to see our new process flow video.

Hydraulic Hybrid Systems - VCIR Technology Showcase

2010-03-01T14:47:00.001-08:00

Lightning Hybrids Receives Larimer County Workforce Center Grant

2010-01-11T08:11:00.000-08:00

Lightning Hybrids received a grant from the Larimer County Workforce Center (LCWC) to employ thirteen interns. These positions, paid by LCWC, will work for 400 to 500 hours each and will focus on projects ranging from mechanical engineering to updating our website.

For more information click here.

Major New Federal Incentives for Fleet Vehicles Likely

2010-01-04T08:04:00.000-08:00

A bill in the Senate (S.2854) will increase potential tax incentives for medium- and heavy-duty fleet vehicles to $15,000-$100,000 for new hybrid technology purchases. This is great news for fleets and gives truck manufacturers great incentive to license HHS’s technology.

This bill has not yet passed and we need your help getting it modified to include hydraulic hybrids in addition to electric hybrids, as well as retrofits in addition to new vehicles.

If you would like a fact sheet to send to your State representative or anyone who may be able to help get the wording changed in the bill please email Bonnie.

-------

Reasons to include Hydraulic Hybrids in State and Federal Incentives

-- Hydraulic hybrids offer the same or better benefits as electric hybrids
- Significant reduction in fuel use (40 to 80% savings in stop-and-go situations)
- Significant reduction in carbon emissions (up to 50% reductions in most environments)

-- There is no battery to dispose of at the end of its cycle life

-- Hydraulic hybrids can be certified by the EPA in the same way as electric hybrids

-- Hydraulic hybrids are safer than electric hybrids
- No specialized hazard training is necessary to work on hydraulics
- Hydraulic components are not likely to explode or catch fire

-- Hydraulic hybrid components are readily available unlike electric hybrids which are constrained by supply availability

-- Hydraulic hybrid components and systems are generally made in the U.S. unlike electric hybrids that are generally built with imported batteries that comprise the majority of the cost

Reasons to include Retrofits in State and Federal Incentives

-- Retrofits extend the life and increase the value of an existing vehicle

-- Hydraulic hybrid retrofits offer the same or better benefits as new hybrid vehicles
- Significant reduction in fuel use (40 to 80% savings in stop-and-go situations)
- Significant reduction in carbon emissions (up to 50% reductions in most environments)

-- Retrofits can be certified by the EPA in the same way as new hybrid vehicles

Hydraulic Hybrid Prototyping

2009-12-29T19:40:00.000-08:00

After testing our first hydraulic hybrid prototype on the LH4 last summer we moved on to creating a prototype on a 2004 Chevy 2500HD in the fall.

We had a truck on loan from the Denver International Airport fleet for the pilot project. It was complete in November and we tested it for a few weeks and that process spurred the major modifications to our Power Transfer Module (see the last post). Unfortunately the transmission on the 2004 truck was not a good candidate for the prototype so we returned the truck to DIA without the hydraulic hybrid system on it with the understanding that we will retrofit a newer truck for them after our next prototype is complete.

Currently we are applying the new tank system and updated PTM to a Chevy Silverado 2500HD. (Detail on right.) The system was applied and has since been removed for modifications and in order to get some baseline performance numbers on the truck. The truck will be complete in mid-February and will debut at the State of Colorado’s Governor’s Energy Office Environmental and Transportation Fair on February 24th. From there we will take it to the international Work Truck Show and Green Truck Summit in St. Louis in early March. We are excited to show it off and will keep you posted regarding these opportunities.

Lightning Hybrids and HHS to Apply for Patents

2009-12-28T16:56:00.000-08:00

During the prototype process with the 2002 Chevy truck from Denver International Airport, our engineering team made some major modifications to our hydraulic hybrid system design. These revisions are significant and we are working to patent the following innovations:

1. Power Transfer Module. Our PTM replaces the vehicle’s torque converter. Since it replaces an existing part, no modifications are required for the drivetrain (such as driveshaft changes, transmission change-outs, etc.) which significantly reduces the cost and increases vehicle efficiency since the torque converter is a major source of inefficiency in stop-and-go driving.

2. Dual Tank System. HHS has designed a two-in-one system with proprietary valves that reduces connections and hoses by surrounding a carbon fiber high pressure accumulator with an aluminum low pressure reservoir. The design reduces connections and hoses, a significant benefit when dealing with 5,000 PSI. Standard steel accumulators weigh over 500 pounds, the carbon fiber tank weighs in under 150 pounds, another way to increase system efficiency. No one else has a certified carbon fiber accumulator and Eaton has signed an NDA to explore using ours in their system.

3. Controls System. The HHS controls system is proprietary and is unique because we are tying into the On-Board Diagnostics of the vehicle to which the system is applied which allows us to achieve ten percent better fuel mileage improvements when used in conjunction with our PTM.

4. Hydraulic System. The hydraulic system is uniquely configured to utilize a standard and proven variable displacement pump in conjunction with a specially-designed valve manifold and uniquely configured high and low pressure tank system.

We've Moved!

2009-12-26T20:13:00.001-08:00

Work has started on the renovation of the Mercury Plaza building in downtown Loveland that will be the future headquarters of Lightning Hybrids and Hydraulic Hybrid Systems. Structural designs are being completed and a new floor is going into the old print shop building.

While we await our new home, we have moved from the east side of Railroad Avenue to the west side. The new space has great office space for our design and administrative team and a nice garage for our vehicle team. We aren't able to accomodate tours at this time, but hope to host an open house in the springtime.

Lightning Hybrids and the X PRIZE

2009-10-21T19:13:00.000-07:00

Back in March we announced that we were accepted as a contestant in the Progressive Automotive X PRIZE. Since then a lot has happened. Most notably, we have decided to focus all of our efforts and funding on the Hydraulic Hybrids Systems retrofit for fleet vehicles. Which means we pulled out of the X PRIZE competition in mid-August. We still plan to exhibit and still plan to have a 100 MPG sports vehicle on the road in 2012, but we no longer have the distraction and funding drain of the X PRIZE's stringent requirements.

It started at the Denver Auto Show with a bunch of people asking us when we would be creating a retrofit for vehicles. If you have followed this blog you know that we researched the idea of retrofitting vehicles and found that there is a need in the light- and medium-duty fleet truck market for a hydraulic hybrid application like ours that provides games of over 40% in fuel efficiency and decreases carbon emissions by up to 50%. There are over 6 million vehicles in this category in fleets in the U.S. alone!

At the same time we were finding that funding for the LH4 and LH3 was very tight. While our technology is sound, we decided to spend our resources on the retrofit prototypes rather than the cars because the return on investment is under a year for the retrofits compared to a decade or more for the vehicles, even if we were to win the X PRIZE race.

The cars are still a passion, but we know that we have to build a successful retrofit business first before the cars can become a reality.

Lightning Hybrids to Raise $1.5 Million in Capital Through One-Year 10% Secured Notes

2009-09-15T12:41:00.000-07:00

Lightning Hybrids to Raise $1.5 Million in Capital Through One-Year 10% Secured Notes

2009-09-15T12:32:00.000-07:00

We have had many requests about how to invest in Lightning Hybrids - well, now we have an investment opportunity for you. We are raising capital to fund the final leg of the Hydraulic Hybrid Systems retrofit pilot project (which will, in turn, fund the future prototyping of the LH3 and LH4.)

This effort will be our first debt offering (We currently have no debt) and will be in the form of a one year secured convertible note. The note will pay ten percent interest and you will have the option to convert the note to equity at a discount when due at the end of one year (standard legal fine print, of course.) The minimum investment is $50,000. If you and/or someone you know are interested in knowing more please contact Bonnie.

HHS Retrofit Pilot Project

2009-09-03T21:40:00.000-07:00

In late July HHS received a truck from Denver International Airport for our Retrofit Pilot Project. It is a Chevy 2500 that runs on compressed natural gas (CNG) and is used for runway checks and plowing. Our plan is to put this truck back on the DIA runway in early October for demonstration and testing.

Work began immediately on assessing the controls systems, transmission and torque converter. Shortly thereafter we created a test stand on which to mount all of the components of the system so we could easily test and evaluate each component of the system.

The system changes daily and is getting closer and closer to being ready to be put back on the truck. Stay tuned here for more information about this Retrofit Pilot Project.

Welcome to Hydraulic Hybrid Systems' Blog

2009-09-03T21:08:00.000-07:00

Thank you for tuning in to HHS's new blog. We hope to use this forum to show the HHS technology as it is beling developed as well as answer questions that you may have.

Please direct any questions in the comments to via email to Bonnie.

Thanks again for reading!

PRESS RELEASE: Hydraulic Hybrid Systems and Equipment Maintenance Innovators Announce Partnership

2009-09-03T20:13:00.000-07:00

FOR IMMEDIATE RELEASE

Hydraulic Hybrid Systems and Equipment Maintenance Innovators Announce Partnership

Two Colorado companies will manufacture and distribute hydraulic hybrid systems for fleet vehicles

Loveland, Colorado (September 3, 2009) — Hydraulic Hybrid Systems, LLC (HHS), a subsidiary of Lightning Hybrids Inc., today announced a partnership with Equipment Maintenance Innovators (EMI-Global) to distribute its hydraulic hybrid retrofit systems.

This partnership brings together two Colorado companies to manufacture and distribute fuel-efficient hydraulic hybrid technology for light and medium duty fleet vehicles. The hydraulic hybrid systems are designed to save fleets millions of dollars a year in fuel costs by providing fuel mileage increases of over forty percent and greatly reducing greenhouse gas emissions compared to a vehicle’s fuel mileage prior to the retrofit.

“Hydraulic hybrids have been around for a while but, there has been no reason until now to explore these kinds of technologies,” stated Richard LeFrancois, founder and president of EMI-Global. “Now is the time to move forward with hydraulics because of the push to cut emissions and dependence on foreign oil. Batteries just cannot address issues for fleets at the scale that we need.”

Dan Johnson, CEO of HHS, said “This partnership with EMI-Global closes a gap we had in terms of distribution and we’re excited about the potential this partnership brings. EMI is known for their expertise in the fleet market and already we are seeing doors open to the partners that EMI brings to the table.”

One of those partners, Denver International Airport recently provided the first truck to be retrofitted with the hydraulic hybrid system, a Chevrolet HD 2500 truck fueled by compressed natural gas. The hybrid system is currently being installed and tested at HHS’s shop in downtown Loveland, Colorado and the truck prototype will be put back into runway service in early October 2009.

In late 2008 Loveland-based Lightning Hybrids began engineering a biodiesel hydraulic hybrid vehicle that combined a small biodiesel engine with a 150 horsepower hydraulic pump on a lightweight sports sedan. The first prototype was displayed at the Denver Auto Show in April 2009. At that show questions arose from a number of fleet managers about the prospect of applying the hydraulic hybrid as a retrofit to existing fleet vehicles.

“We explored the opportunity and found a need for fuel and emissions savings in the light-duty fleet market,” said Johnson. “A hydraulic hybrid retrofit system is an excellent answer in situations where the light duty fleet vehicle does a lot of start and stop driving, such as city and state fleet vehicles, vocational and contractor trucks and vans, mining and oil field vehicles, and school buses.”

Hydraulic hybrid systems are already available from several manufacturers for new heavy-duty trucks (delivery trucks and refuse trucks) and the U.S. Environmental Protection Agency has developed and tested hydraulic hybrid vehicles in the past.

In late April 2009 the engineering team started the design and implementation of a hydraulic hybrid system that could be applied to these fleet vehicles. Lightning Hybrids established Hydraulic Hybrid Systems, LLC in July 2009 to manage the manufacturing and distribution of the system.

HHS also currently has a 2008 Chevy Silverado HD 2500 in the shop that will serve as a demonstration vehicle. The truck is stripped down almost to a bare chassis and has a plexiglass floorboard to show the system as it works. Other vehicle platforms will be prototyped in the near future to meet the needs of current fleets. The system will be manufactured in Loveland starting in 2010, creating dozens of new jobs in this small Northern Colorado town. After manufacture, the systems will be installed and maintained by mechanics trained by HHS.

So far test data on the system shows that adding the system to a vehicle:
- Does not affect the existing safety rating of the vehicle, in fact it improves braking safety due to the back-up braking system and increased acceleration performance
- Improves the reliability of the vehicle because it adds another power source
- Increases fuel efficiency up to 40% for general non-highway uses
- Does not affect the emissions systems of the vehicle
- Emissions reduction of 40% of carbon dioxide, the primary greenhouse gas

HHS’s parallel hydraulic hybrid system is similar to many of the electric hybrid vehicles on the market today wherein a conventional internal combustion engine can drive the vehicle by itself or be assisted by another power system which can be mechanically coupled or decoupled from the main conventional driveline. In the parallel hydraulic system a hydraulic motor/pump acts in place of the electric motor in an electric hybrid, and a hydraulic accumulator tank pressurized to 5,000 psi acts in place of the batteries. Compared to an electric hybrid system, hydraulic hybrid systems are much safer and less expensive to maintain.

###

About Hydraulic Hybrid Systems, LLC
Serious Fuel Savings > Heavy Duty Acceleration > Efficient Brake Regeneration > Safe Carbon Reduction

A subsidiary of Lightning Hybrids, Hydraulic Hybrid Systems (HHS) is a truck equipment manufacturing company headquartered in Loveland, Colorado. The company has designed a hydraulic hybrid system that can be applied to fleet vehicles and will achieve over 40 percent reduction in fuel consumption. The first platform, for Chevrolet 2500/3500 light duty trucks of any fuel source, is available now and other vehicles will be added and available through distributors later in 2009. The average price of the system for light duty trucks is $12,900.

For more information about HHS, please visit http://www.hydraulichybridsystems.com/

About Equipment Maintenance Innovators
…Technology Integration for the World of Equipment.

Founded in 2000, Equipment Maintenance Innovators (EMI-Global) is a technology integration company headquartered in Littleton, Colorado serving the international construction, trucking, oil field, mining, waste, utility and telecommunication markets. The company flagship product, MOBILE-SCADA® is comprised of a suite of industry leading technology applications designed for improving machine operating efficiencies. MOBILE-SCADA® applications consist of Machine Control Technologies, Hybrid Propulsion Technologies, Fuel Management Technology, Power Management Technology, Load Management Technology and Asset Management Technology. EMI-Global founder and president, Richard LeFrancois, has thirty years experience in the truck and construction equipment industry; he has been published frequently in Fleet Maintenance magazine’s “Emerging Technology” column and has been frequently cited as a “industry expert” in ENR magazine, a publication of McGraw-Hill. LeFrancois regards the Lightning Hybrids/Hydraulic Hybrid System technology as an excellent fit for the EMI-GLOBAL business model, its customers and a technology that will be adopted industry wide in the proper application.

For more information about EMI-Global, please visit https://exch1.123together.com/owa/redir.aspx?C=56a4b366eee244c598dcec8a50a90b42&URL=http%3a%2f%2fwww.emi-global.com

About Lightning Hybrids Inc.
Go fast, go far, go green. No compromise.

Founded in 2008, Lightning Hybrids Inc. is an automotive research and manufacturing company headquartered in Loveland, Colorado. The company has designed a line of 100 MPG biodiesel-hydraulic hybrid vehicles. The cars, with sports sedan performance (0-60 in 5.9 seconds) and visual appeal, are expected to sell for $39,000-$59,000. Prototype manufacturing began in January 2009. Two Lightning Hybrids prototypes will exhibit in the 2010 Progressive Insurance Automotive X Prize race, for clean, production-capable vehicles that exceed 100 MPGe. Additionally the company has created a hydraulic hybrid system that can be applied to fleet vehicles to achieve over 40 percent reduction in fuel consumption. This technology is available to fleet vehicles through Lightning Hybrids’ subsidiary, Hydraulic Hybrid Systems, LLC (HHS).

For more information about Lightning Hybrids, please visit http://www.lightninghybrids.com/

###

Current Engineering Projects

2009-08-20T08:40:00.000-07:00

Here is a list of engineering projects our team is currently working on:

- Working on the coordination of the hydraulic hybrid system including assembly and manufacturing proponents - both electrical and mechanical.

- Designing the hydraulic circuit, making sure all the components work well together.

- Designing the acceleration and brake pedals, as well as the power transfer sprocket assembly.

Power transfer sprocket assembly

- Putting the finishing touches to the hydraulic control unit (HCU). The HCU consists of the digital controller which executes the control algorithms as well as the analog sensor and the power controller interfaces to the hydraulic pump/motor, the brake and acceleration pedals and the Engine Control Unit.

- Working on an animation demonstrating the hydraulic hybrid retrofit system. The use of robust modeling and animation software aids in the ability to take concepts and bring them to light in a aesthetically pleasing and timely manner. It also provides a good medium in which people who may not have a hydraulics or engineering background can grasp the concepts with minimal explanation.

Updates on these projects will be posted soon.

Northern Colorado Entrepreneurs Network Presentation

2009-08-18T20:24:00.000-07:00

Yesterday the Northern Colorado Entrepreneurs Network (NCEN) brought together some of the advanced vehicle technology companies in the northern Colorado region to give short presentations about our business plans and current needs. Lightning Hybrids/Hydraulic Hybrid Systems (Loveland), EVolve Electrics (Longmont), Air Powered Car (Littleton), and Czero (Fort Collins) each made presentations.

Bonnie Trowbridge, our VP of Marketing and PR, gave the following presentation to over 50 regional entrepreneurs. We welcome your feedback.

Hydraulic Hybrid Systems, LLC

2009-08-17T08:07:00.000-07:00

As we have mentioned before, Lightning Hybrids has started a subsidiary called Hydraulic Hybrid Systems, LLC (HHS). This new company will manage the hydraulic retrofit/upfit side of the business.

This week our posts will focus on HHS - everything from our business plan to what our engineers are working on to make the hydraulic hybrid system a reality. We will start with the most current information about this project.

---------------

Hydraulic Hybrid Systems, LLC, a division of Lightning Hybrids Inc., has created a hydraulic hybrid system for the fleet truck market. The HHS solution involves inserting a high-efficiency, light-weight hydraulic propulsion system within the driveline of a vehicle. This system is designed and engineered to be installed in fourteen hours, including all controls and wiring harness, by a certified installer. The system has been successfully tested by the EPA and at various state sponsored university technology incubators including a program at Colorado State University. Successful installations have been on vehicles from the Ford Excursion to Class 8 vocational trucks.

In this very simple and effective configuration a hydraulic pump is coupled to the driveline via a belt and clutch. This parallel hybrid system can deliver over 40 percent improvement in fuel economy, depending on the amount of braking seen during a normal drive cycle. The pump and accumulators store braking energy, and upon acceleration, the pump becomes a motor that uses the stored energy in the accumulators(s) to provide torque to power the wheels. The large fuel efficiency gains are achieved by regenerating the braking energy that is normally lost to heat, and using this energy instead of (and in addition to, if needed) the internal combustion engine for acceleration.

The hydraulic hybrid system includes a heavy-duty Eaton hydraulic pump and motor, an ASTM certified high pressure accumulator tank, a low pressure reservoir, a valve block, HHS control system, brackets and associated certified hoses. System operation is seamless to the operator.

In addition to the demonstrated fuel savings opportunity there are other advantages to this type of hybrid system (especially for the fleet manager). They are: the system requires no bed or cab interior space since all components fit within the chassis frame; there is little or no additional workforce training needed in maintaining the system since hydraulic component and driveline maintenance is already being done in the shops of the target market; it is proven safe, and all components are readily available within the existing truck parts distribution network.

The critical and exciting opportunity for this technology is the return on investment garnered from fuel savings. The table below shows several examples and the assumptions made. Note that if gas prices are higher than $3 per gallon (as it already is in some parts of the US and all of Europe), the ROI improves further at a fast rate. This table does not include any federal credits for advanced vehicle technology, hybridization, or emissions improvement (which currently provide $1,500 to $7,500 incentives), nor does it account for savings with brake replacements or the extension of the service cycle for vehicles.

(Click on table to enlarge.)

Facebook

2009-07-30T19:32:00.000-07:00

Are you on Facebook? We are and would love to have you as a fan! Search for us - the official site is the one with the image of the lightning bolt.

Q&A: Doubling Prius' Gas Mileage

2009-07-24T15:28:00.000-07:00

We frequently get questions about different aspects of LHI. I will be posting some of them here in the hopes that readers will find the info interesting or helpful.

Q. I don’t know what to say when somebody makes impossible claims about their new product. This design seems similar to a Prius, except that the hydraulic system will store much less energy than the battery in an electric hybrid. How could this possibly double the mileage of the Prius? The hydraulic hybrid system is well-known. It is fine for delivery trucks, but offers few benefits for a general-purpose car.

A. The hydraulic system has the benefit of storing energy at a much faster rate than the electric hybrid. It is true that the electric hybrid system can store a larger amount of energy, but that energy is also not free because of the fact that the electric system cannot recover the full amount of energy in even a normal driving cycle stop. The Prius often runs the gas engine in order to maintain energy levels in the batteries. In terms of energy density the two systems may be comparable but in terms of storage rate and efficiency the hydraulic system has an advantage. This coupled with the fact that a turbo diesel engine is about twice as efficient as the gasoline engine in the prius and the body design of LH4 improves the already excellent drag characteristics of the Prius with a lighter chasis and body substantiates our claim of doubling the efficiency of the Prius.

Fleet Retrofit Pilot Project

2009-07-23T06:45:00.000-07:00

Dan with the truck from DIA

Yesterday we received the first truck for our fleet retrofit project. It is a Chevy 2500 four-wheel drive powered by compressed natural gas. It is from the Denver International Airport ground fleet.

As soon it arrived Dan and the team were under the hood and checking out the drivetrain to see where there would be room for the hydraulics and tanks. There is ample room under the truck.

We are excited to work with the natural gas vehicle and will get a gasoline powered truck in soon as well so we can get some good baselines and apply the hydraulics. The truck will be in the shop for about 45 days before it is put on the road and in the CSU engines lab for testing for a few weeks. It should be back on the runway at DIA by October 1.

Q&A: Leaks in the Hydraulic System

2009-07-22T15:22:00.000-07:00

We frequently get questions about different aspects of LHI. I will be posting some of them here in the hopes that readers will find the info interesting or helpful.

Q: Fantastic concept. What about oil leaks from the hydraulic systems and the resulting fire hazards? I have seen industrial hydraulic systems that, over time, tend to get leaky.

A: Certain types of seals work better than others. If you are clever enough in how you design your manifold you can eliminate most of the hoses or piping in the plumbing. By sticking to mainly o-ring and mechanical seals in the few seals that you have you can largely eliminate leaks from the system.

In fact, you may remember that we had a leak in our hydraulic system minutes before our May 27 Open House. While it was messy, it was no more messy, or dangerous, than a standard oil leak.

Q&A: Pneumatic Hybrid

2009-07-21T15:19:00.000-07:00

We frequently get questions about different aspects of LHI. I will be posting some of them here in the hopes that readers will find the info interesting or helpful.

Q: The actual energy storage is in the gas in the bladder of the hydraulic accumulator. Why not have a pneumatic hybrid? Way back in 1930, a diesel-pneumatic was more efficient than a diesel-electric, and air is cheap and easy to store.

A: The Hydraulic Hybrid in this configuration is essentially a pneumatic hybrid as mentioned. The energy is in fact stored by compressing air. The air that is compressed is nitrogen gas which is held in the accumulator bladder. The advantage of the hydraulic system is that you are pumping an incompressible fluid which allows you to achieve higher flow rates in a smaller package. A one hundred horsepower compressor that would allow you to compress and store enough energy to accelerate the vehicle from a stop would be half the size of the vehicle itself. Imagine an industrial air compressor. As I understand most pneumatic hybrid vehicles use a smaller compressor that runs continuously at a low power setting. The one hundred horsepower hydraulic pump occupies much less than a cubic foot of space and only weighs 45 pounds.

Q&A: Hydraulic Hybrid Systems

2009-07-20T06:44:00.000-07:00

We frequently get questions about different aspects of LHI. I will be posting some of them here in the hopes that readers will find the info interesting or helpful.

Q: I have a few vehicles that I want to continue driving so I'm interested retrofit kits. Is your company considering selling retrofit kits for existing vehicles?

A. Yes, we are focusing our work right now on retrofits as there is a large market for them. Unfortunately each vehicle platform requires a slightly different retrofit in terms of controls so we are starting with a few trucks (Chevy Silverado type) and possible a larger passenger car (Dodge Charger) that are used in many fleets. We hope to have a broad spectrum of retrofits within a year.

Q. If retrofit kits are made available do the vehicles have to be rear wheel drive and will the gas economy improve?

A: The EPA's tests on hydraulic hybrid technology show a 40 to 60% improvement in fuel economy which comes from using the hydraulics for acceleration and stopping, where the internal combustion engine loses the most efficiency. The cars do not have to be rear-wheel drive as we can apply the retrofit to any vehicle differential(s). There is more info on our hydraulic hybrid system here. (Check the hydraulic hybrid links for a written description of the retrofit, a diagram, and information about fuel savings and return on investment.)

Q&A: Vehicle Pricing and Warranties

2009-07-17T09:59:00.000-07:00

We frequently get questions about different aspects of LHI. I will be posting some of them here in the hopes that readers will find the info interesting or helpful.

Q: If I understand correctly the LH3 will be made available in 2010 between $39,000 to $59,000. Is this range due to the uncertainty of the final production cost or due to accessories? Also, will the company provide warranties and will the warranties be based on time or mileage?

A: The prices of the LH3 and LH4 will vary both due to uncertainity in final production cost and choice of accessories. We are hoping that production costs will come down as quantities go up, and we plan to have a lot of optional accessories depending on your needs in a vehicle. The company will provide warranties that are similar to those of vehicles currently on the market. Both the list of potential accessories and information on warranties are listed below and can be found on this webpage: http://www.blogger.com/redirect?url=http%3A%2F%2Flightninghybrids%2Ecom%2Fsolutions-vehicle-specifications%2Ehtml&urlhash=d-D5&_t=tracking_disc

Both the LH4 (four-wheels) and the LH3 (three wheels) have essentially same specifications, except where noted below.

Price: $39,000 (LH3) to $59,000
Production: 2011 (LH3) and 2012 (LH4)
Form: Four-seat compact sports sedan
Engine: 1.4 Liter 85 HP TDI diesel/biodiesel
Hydraulics: 105 HP high efficiency hydraulic pump/motor
Seven Gallon 5000 PSI carbon fiber accumulator
Supports two full 0-60 accelerations, or 7 miles steady state at 40 MPH
Estimated Charge time at idle is 1 minute
High brake regeneration efficiencies (70%)
Proven safety and scalability (fighter jets, commercial airlines, industrial equipment, etc.)
Drive Train: 190 HP (85 HP diesel engine + 105 HP hydraulic pump/motor)
Hybrid System: Parallel hybrid system
Computer controlled algorithm dynamically decides best fuel mileage scenario
Driver switchable between economy and performance mode
Efficiency: 100 MPG (clean diesel/biodiesel)
Dry Weight: 1,800 pounds curb vehicle weight
Braking: Regenerative Hydraulic braking plus ABS all-wheel discs
Materials: Carbon Fiber body, Chrome Moly and Carbon Fiber suspension, Aluminum engine
Acceleration: 0-60 in 5.9 seconds
Coefficient of Drag: 0.24
No outside mirrors (cameras and interior displays will replace the outside mirrors)
Smooth under belly pan
No front grill (Diesels run cool, allowing the radiator to be placed at the rear of the car)
Standard equipment includes:
Automatic transmission
Custom Bucket seats
Electric Heat and Air conditioning
Driver and passenger air bags
Electronic Stability Control
Power Windows/Power Door locks
5 exterior and 2 interior color options (Black, Red, Silver, White, Blue); Tan and Grey
Optional equipment:
Trunk storage rack
18" Aluminum Wheels
Heated Seats
Home charging system (electric)
Sports Hydraulic Package (0-60 in 4 seconds):
Upgraded tires and Aluminum 19 inch wheels
Upgraded Hydraulic Pump/Motor (150 HP) and accumulator
Upgraded leather seats with custom piping and logo/name embroidery
Additional Driver controls of econ/performance mode

Product Warranty
The major drivetrain system components that LHI will use will be covered by a three-year or 36,000 mile OEM warranty. This includes the engine and drivetrain, the hydraulic system as well as the emissions system. Further limited warranty coverage will be provided by LHI to achieve a total coverage of three years or 36,000 miles, whichever comes first for most systems and ten years or 120,000 miles for the emissions systems. This coverage of three years or 36,000 miles includes hydraulic system components that are not replaceable items (i.e. drive belts). In the event of manufacturing defects for any subsystem component, the labor components of the warranty package will be backed by Lightning Hybrids while the component manufacturer will cover the parts replacement.

The components that are covered in the hydraulic system are designed for use in industrial applications such as earth moving equipment. The hydraulic system components are designed for continuous load applications, such as 100,000 cycles during the component lifetime. The hydraulic system OEM will provide a warranty for all hydraulic subsystems for a period of two years with unlimited mileage. The hydraulic system will be further covered for another year and up to 60,000 miles by an authorized dealer and/or LHI. This warranty will cover the hydraulic system for defects in parts and/or workmanship.

Engineering TV Series Complete

2009-07-16T10:16:00.000-07:00

Full Lightning Hybrids series on Engineering TV up now: click here.

(Be sure to watch the entire episode. It starts with four minutes then a short commercial break and then another three minutes.)

Thanks to Engineering TV (also Loveland-based, by the way) for the great coverage! Curtis Ellzey and Terry Knight did a great job and we are excited to have the professional documentation of our technology.

Job Creation Incentive from the City of Loveland

2009-07-07T22:22:00.000-07:00

Last night the Loveland City Council unanimously approved a job creation incentive plan for $100,000 for 50 new jobs in the next two years. We are excited to continue toward our goals with the endorsement of the City of Loveland.

The package states that the jobs created must be 50 R&D jobs paid $65,000 or more a year on average and sustained for 12 months. If we do not create and/or sustain the jobs we will repay $2,000 back to the City per job.

We are up to the task!

You can read the articles on our News page (look for July 8 postings).

Speaking of Loveland, we drove the car around downtown yesterday. Some pictures:

Open House

2009-06-30T12:41:00.000-07:00

Last week was a busy one focused around our large public open house. Along with Friday's open house we also hosted a a smaller event for fleet managers on Wednesday. It was a stressful time for our team, with the pressure to show a working hydraulic hybrid system and the LH4 with a functioning door looming over us.

Wednesday went well with over 25 area fleet managers and car dealers coming in to take a look at the hydraulic hybrid system and to talk about the retrofit that we will have available for fleets in the Fall. (We will post more about that later this week.)

Friday dawned clear and sunny and all was looking good with the car. The door was opening, the hydraulics were functioning, the car was running. Around 2 p.m. a huge thunderstorm hit the area with strong winds and torrential rain. And yes, some spectacular lightning.

At the same time, the LH4 clamshell door started malfunctioning. Then we blew a hose in the hydraulic system which drained it, making it inoperable.* You can imagine, the tension in the garage was very high.

As 4:30 drew nearer, the sky cleared, and we came to grips with the fact that the car was going to stay in the garage for the open house. (Sorry Mayor Pielin - we'll take you for a ride soon!)

We braced ourselves for the crowd at the door at 4:30 and were pleasantly surprised with the support and understanding of our guests. Over the course of the evening we showed about 350 of our fellow Lovelanders, and others from as far away as Minnesota, our shop and the temporarily docked LH4.

Tim Reeser, Lightning Hybrids Co-Founder (center, gray shirt), talks to the open house crowd. The LH4 is on the left with the clamshell door open. (Photo courtesy Jeff Barr.)

Thank you to everyone who came out! Your enthusiastic show of support and your thoughtful comments and suggestions were just what we needed at the end of long week.

For links to recent articles click here.

*If you're wondering what happens when you blow a hose in the hydraulic system, the answer is: nothing dramatic, just a big puddle of hydraulic fluid... Unfortunately our technician, Chris, happened to be under the car at that moment. His hair really glistened after that.

LH4 Maiden Voyage Video

2009-06-21T22:17:00.001-07:00

A very proud moment.

(Click here if video doesn't load.)

Maiden Voyage Photos

2009-06-20T16:15:00.000-07:00

Rick Wilking from Reuters was out this morning for a first look at the LH4's "maiden voyage".

Check out his full photo essay here.

Here's a taste:

photos copyright Reuters/Rick Wilking

The Tadpole

2009-06-01T09:36:00.000-07:00

Here is a rough draft of the newest version of our three-wheeler - nicknamed the Tadpole. We are experimenting with the two front one rear wheel configuration to see if we can imporve efficiencies.

Safety Dance

2009-05-27T07:02:00.000-07:00

LHI is working on multiple platforms and drivetrains, and is in need of additional talent to help us navigate the regulatory puzzles. If you or someone you know has experience with EPA and/or NHTSA and are looking to contribute even a few hours a week, please contact Bonnie at lightninghybrids dot com.

Q & A

2009-05-26T12:13:00.000-07:00

Editors Note: Eric's question is in response to our post about the $70 million Department of Energy grant we applied for to work with CSU on developing a new vehicle around their new electric battery platform. This is a completely separate project from our hydraulic hybrid platform.

From Eric: Wow, you are planning on a rate of 4 vehicles delivered a day in only a few years... That is a pretty ambitious goal, what do you have in mind to get there?

Lightning Hybrids: A lot of automation and personnel investment, frankly. Remember, the numbers for the electric vehicle platform are based on a successful $50 million grant from the Department of Energy and much of that funding is for new job creation and infrastructure investment, namely the 1,000 associated jobs related to the investment in manufacturing automation equipment, and the 300 assemblers we will hire to put the cars together and run the automation equipment in year three and four. After the first 18 months of development of the battery and the cars and a year for testing it is a straight shot to mass production.

FRED

2009-05-22T18:01:00.000-07:00

Fred working on the embedded computer board

Lightning Hybrids is pleased to announce that we have hired an electrical engineer who goes by FRED (Fantastically Ridiculous Electrical Designer). A huge asset on the controls side, Fred is has been working on the measurement and dynamic modeling of the hydraulic system, as well as the design and implementation of the embedded computer control systems for the vehicle. The embedded system is responsible for the coordination and control of all dynamic operations involving the interaction of the hydraulic system (in pump and motor mode) with the diesel engine.

Keep Our Router Busy

2009-05-19T12:51:00.000-07:00

Now that we are focused on the drivetrain and controls, our 5-axis router isn't getting the work-outs it needs. Do you or someone you know need 3D parts created? See below for email contact info.

As you may remember, Lightning Hybrids has a DMS CNC 5-axis router. This machine is capable of cutting foam or MDF. It is equipped with two 5x5 foot tables allowing us to place and cut parts that are about 4.5 feet by 9 feet.

Our machine has 4 feet of vertical Z movement allowing us to effectively cut a 3.5 foot tall part in one single operation (fixture). With this machine, we can prototype complicated geometries that a traditional 3-axis machine is incapable of. Our costs also run lower, since we can utilize flat cutters to create complex curves.

As you know, we used this router to produce our aerodynamic 3D vehicle shapes. Our entire car body was created - from foam blocks to a finished product - in less than three weeks.

We use MasterCAM X3 for our 5-axis programming, and can convert 3D drawings to toolpaths using MasterCAM in less than two days.

If you need something produced, we'd be happy to work with you to create the part you have been designing. For more information please email Chris at lightninghybrids dot com with a description or part file for high or low production numbers.

Body Work

2009-05-17T14:29:00.000-07:00

After the April auto show, we came back and decided that there were a few changes we wanted to make to the body. You know how these things go - there are always improvements to be made...

Here are some of the things that have changed on the LH4 body:

- We curved the nose under more (as Matt demonstrates in the picture below)

- We added six inches to the rear portion behind the wheels, meaning more trunk space

BeforeAfter

- We moved the roof and rear section of the car back six inches, giving the back passengers more head room (which all of us tall people really appreciate). By doing that we elongated the windshield, so it flows into the car body better.

Before
After

All the changes have made the whole car much more aerodynamic. It looks like a different car! Let us know what you think and what you would change.

It's Electric

2009-05-15T11:41:00.000-07:00

We have recuperated from the Denver Auto Show and have been busy in the shop getting the drivetrain running and designing the controls for the vehicle. In addition, we have been in negotiations regarding funding and are in the process of applying for a few Recovery Act grants.

One of the newest developments is a potential partnership with Colorado State University to develop our car around technology for advanced plug-in hybrid electric and straight electric vehicles at a base price of under $40,000.

CSU has developed a brand new 3D Cu2Sb Nano Technology battery that promises inexpensive and highly scalable manufacturing. (See photo on the right of actual nanotech battery in early development.) This patent-pending technology is exciting because the new materials and nano-tube approach resolve the issues that surround current batteries such as high costs, weight and size, and battery life of less than three years. The CSU battery will be a fraction of the price, size and weight of existing batteries, will fully charge in mere minutes with at least double the life span.

Lightning Hybrids has submitted a proposal under the Department of Energy’s Transportation Electrification Grant requesting a grant award of over $50 million for research and development of this technology and development and testing of the vehicle.

If we receive the funding our plan is to manufacture these cars in Loveland at a rate of 120 per year in 2011, 1,000 per year in 2012, and 10,000 per year by 2014. Our staff will grow from 12 to over 300 green-tech employees in that time. As with our hydraulic hybrids (which we will be producing concurrently to the electric), much of the vehicle components will be outsourced to other local companies, therefore stimulating our economy with even more local jobs.

All of our vehicles will meet standard consumer expectations for options, features, ergonomics, and driveability to achieve mass market penetration. Two electric models will be developed:

- A biodiesel-plug in electric hybrid vehicle (PHEV) with a 40 -mile all-electric range. This vehicle will be a combination parallel-series hybrid vehicle (proprietary clutch activation system) with a 1.4 liter biodiesel engine.

- An all electric vehicle (EV) with a 100-mile range and a charge time of 15 minutes.

WE NEED YOUR HELP! Please contact your State and local representatives to tell them about Lightning Hybrids and ask them to support our proposal to create a more sustainable future for our community through invention, job creation and reduction of dependence on foreign fuel.

(For more information and a full write up on the proposal please contact Bonnie at bonnie at lightninghybrids dot com.)

Guest Blogger: Sam Johnson

2009-04-26T22:18:00.000-07:00

Sam Johnson is the father of Dan Johnson, Lightning Hybrids' CEO. He is the inspiration behind the car.

While visiting with my sons Sam and Dan in spring of 2008, I challenged them to design a car capable of 100 mpg that weighed about 1200 pounds. They said they could do this, but they did not have the time or money. A couple of months later, at a Colorado State University engineering display, they were looking at a test car and discussing a hydraulic system.

Later in the year, Dan sold SARobotics, the company he had started in 1992, and Sam was completing the main design on his Stealth Flying Eye. They submitted a plan to me to start an auto company to build diesel-hydraulic cars. When I learned they planned to start Lightning Hybrids and mass produce 3-wheel and 4-wheel vehicles, I decided to move to Loveland from where I was living in Arizona. Within a week Dan and his wife found an apartment for me, and I moved four blocks from the Lightning Hybrids 13,000 square foot warehouse.

For normal people the April 1 date for the car show (merely six months after the company opened its doors) would have been impossible to meet. I may have been to blame because I had taught my children that "THE IMPROBABLE WE DO IMMEDIATELY, THE IMPOSSIBLE TAKES LONGER!”

Dan said they would meet the date and set to work to do so. He hired people who learned to work as small children; to most of them work on a new project is fun. In Jan 2009 the design of cars was finalized. A large 5-axis router was purchased to cut body parts for the carbon fiber molds. Other machines were purchased and Dan and his crew set up the manufacturing facility. The team was made up of a senior design engineer, five engineers, painters, welders -- all 32-years-old and younger -- and four part-time college students, 15 people in all. Body parts were laid-up in a small shop in Boulder, Colorado. Tim Reeser was taking care of logistics and my son Sam and I assisted part time.

We were small crew with one goal -- CAR SHOW ON APRIL 1.

Having worked in heavy industry since 1945 I learned there was one phrase you can not accept: "CAN'T DO " and this crew certainly took that to heart.

On the last day the entire crew worked until 5 A.M. and returned 2 hours later to load up for car show and then worked until 10 that night. Since I was older and smarter I stayed home.

To properly understand these dedicated people you have to understand that they learned these habits early in life. To better describe this I wrote a book called Which Way? U.S. Engineer Education – Fail or Pass. (My first book was The Art and Life of Eloise June Johnson. For copies of either one please leave a comment with a way to reach you.)

We Survived

2009-04-06T21:34:00.000-07:00

After five long days at the Denver Auto Show the LH4 is back in the shop.

Our staff team is taking a week off to recuperate. We will catch you next week when we are back and focusing on the drivetrain.

In the meantime a few highlights for you:

- At least 5,000 people through our booth.

- The large number of people who wished us well.

- The couple who drove all the way from South Dakota just to see our car.

- Kenny from the custom bike booth who came and polished the car a few times every day. If you need a professional detailer - one of the best in the business - let us know and we will give you his number. - Shantel, a professional massage therapist, who gave our team chair massages at the close of the show. She's got the magic touch, and we might share her number if you ask nicely.
- Our t-shirts were so popular that quite a few got swiped (at least 20). - The chassis/drivetrain display was a huge hit and really helped to explain our technology.

A few more pictures:

Free T-Shirt?

2009-04-02T07:55:00.000-07:00

Coming to the Denver Auto Show? If so, mention that you read our blog and get a free Lightning Hybrids Premier Edition collectible t-shirt.

(while supplies last)

TAA DAAAA!!!

2009-04-01T22:36:00.000-07:00

And now, the blog post you've all been waiting for...

But first, a picture of the finished LH4. (Well, OK, it isn't running yet, so it technically isn't finished, but it is finished enough to show at the Denver Auto Show.)

Pictures cannot begin to do it justice.

-----------------------------------------------------------------------

A very tired, but giddily happy crew rolled the LH4 into the Colorado Convention Center this morning for the Denver Auto Show.

The car came out of the paint booth at 6 p.m. on Tuesday after intensive painting sessions by our paint team, Matt and Brian, who have the blisters to prove it.

Dan and crew finished putting the car together at 4:30 a.m. There were a few dazed faces and cups of coffee to keep everyone going, and installing the dash almost made us throw in the towel, but Ken pulled out the original CAD designs and it all came together - every seam lined up, every bolt in place.

Delivery this morning meant two trips from Loveland to Denver (about an hour each way) since the car and the LH3 chassis/drivetrain only fit in the trailer we had to buy this week - but not at the same time... So Rich and Ed left at 5:30 to take the chassis down. (Thankfully the snow was supposed to hold off until the afternoon.) They had some trouble getting in to the convention center since it was early, but they were finally allowed access to the floor. After unloading the chassis they headed back to pick up the car.

The entire crew arrived with the car right after 11 - what a thrill to see it roll off that truck!! Even if it was two hours late. At that point we only had an hour before the floor opened for the pre-show to get the car cleaned up and to get the chassis on the display stand (picture below, if you are coming to the show be sure to check it out - it is a great way to see how the engine works with the hydraulics.) We also had to get our new video set up to loop in the 52" TVs. (As soon as we get a dub of the video that we can post we will post it.) It was such a relief when everything was done.

After we finished setting up, Shawn Patrick from Denver's 9News came out for a follow up interview to their February story. Check out the official "unveiling" here.

It started snowing about 4 and so we thought attendance would be light. Not so - our booth was packed the entire night. It was energizing to talk about the car and the technologies and to see people's reaction to it. The most asked question of the night: Where is the door? Some people didn't get it even after viewing the door opening on the video. But that's OK. Some people were very negative about the car. But most people were very encouraging and we heard time and again that the government should have given small companies like ours the auto bailout money. That's a nice vote of confidence! (Wouldn't that be nice... think what we would do with even $1 billion dollars...)

It was a great start to the show.

Next goal: a driveable car for our Open House in May.

But first we have to get through four more days at the Denver Auto Show. Come see us - we're in booth 417, right next to the Mazda booth and the Army booth and their huge Hummer and prairie dog shooting game. (Our car faces the Madza Miata - which is the car we cannibalized for the chassis was back at the beginning of the year. Remember this?)

Denver Auto Show Set-up

2009-03-31T19:57:00.001-07:00

We were at the Colorado Convention Center today setting up our booth.

We had some tiles that look like the stone footing the car is on in many of the renderings so we put that in. And didn't like it so we took it back out.

We put up the huge TV stands and info boards. And then we wandered around looking at the cars. Our booth is close to Mazda and the antique car club and Lamborghini. There may or may not have been drool on our chins.

At 6 p.m. the show manager came over and asked where our car was. Evidently all cars were supposed to be on the floor by 6 p.m. tonight. We didn't find that tidbit anywhere in the exhibitors handbook - our handbook it said that exhibits had to be finished by Noon on 4/1 - tomorrow.

They cut us some slack and we have until 8 a.m. tomorrow to have the car there.

Thankfully it came out of the paint booth this evening. It is drying and being detailed. Hopefully the snow storm that is forecast for tomorrow will hold off to the afternoon.

More News

2009-03-31T19:39:00.001-07:00

Another news segment that ran today on CBS4 here in Denver. Click here.

Want One?

2009-03-31T14:57:00.000-07:00

OK, not a car. Though we do have a growing waiting list for both versions...

How about one of our sweet T-shirts to tide you over? Premier edition. Collectible. (Top - front, bottom - back.)

For now only available at the Denver Auto Show for $20 each. After the show we will offer them for sale on our website - $20 plus $5 shipping and handling. Sizes XS to XXL.

News Coverage

2009-03-30T22:03:00.000-07:00

Check out the segment on Denver's Channel 7.

Over the Hurdle

2009-03-30T21:40:00.000-07:00

Our last big worry (other than getting the paint dry in time to transport the car) was whether the windshield would fit. We did a normal plug using styrofoam which was used to make the mold. Unfortunately the mold cracked when the glass was put in. If it didn't work there would have been no time to go back and make another one, and obviously, we can't just order a new one. It would have been a deal-breaker for the auto show...

So there was a huge sigh of relief when it came in and when we put it in and...

it fit.
It may not look great now but give us a few hours to get it polished up.

A picture of the LH3 chassis and drivetrain below. You can see an animation of the drivetrain on our Solutions page.

Animated Clips

2009-03-29T14:46:00.001-07:00

Our new "commercial" is being edited this weekend - can't wait to see it! In the meantime you can check out some of our new animations of the door opening and the drivetrain in our gallery (up on Monday) and on Youtube (up now).

Three Days, Part II

2009-03-29T14:33:00.000-07:00

- Here are the hubcaps on the router and being polished. They look terrific on the wheels.

- The show displays arrived and are ready to go up in our booth. We'll be in booth 417 at the Denver Auto Show - stop by and see us!

Three Days, Part I

2009-03-29T12:11:00.000-07:00

Only three days to the Denver Auto Show. Updates:

- LH4 parts are all on the chassis and primered. Painting today and tomorrow.

- The LH3 belly pan is painted and on the chassis. We will be showing the drivetrain in the LH3 chassis at the show and our youngest team member has painted the different parts to match the coloring on our new animation of the drivetrain (animation to be posted soon). Free t-shirt to first person to correctly identify these two painted drivetrain parts... leave a comment including a way to contact you.

- The interior dash is fully molded and the mold will be in the LH4 for the show.

- The seats look awesome.

Spring Snow

2009-03-26T13:04:00.000-07:00

Good news: Much needed snow is finally falling in Colorado!

Bad news: The LH4 body parts are stuck in Boulder...

Roads are closed and authorities are asking everyone not to drive until tomorrow morning because of the snow and ice.

Hopefully we won't have to go to the show with unpainted carbon fiber...

(Image courtesy of CDOT traffic camera.)

One Week

2009-03-25T11:59:00.000-07:00

Just one week until we have to deliver our car to the Denver Auto Show.

We knew when we decided to go to the show that it would be a tight deadline. And with supplies arriving later than planned and staff dropping like flies due to the awful cold/flu going around here in Colorado (not to mention lowered immune systems due to working around the clock) we are really feeling the crunch.

But don't worry. We will be there. With the LH4 and the LH3 chassis and drivetrain looking good.

Just bring some hand sanitizer if you plan to shake hands with our staff. And don't touch the car... the paint might still be wet...

In the meantime send us good wishes and coffee.

X PRIZE Update

2009-03-24T19:30:00.000-07:00

After being accepted as an official Progressive Automotive X PRIZE participant in January our team is now finally listed on their website as such.

Check it out here.

Lightning Hybrids Technical Solutions

2009-03-14T13:06:00.000-07:00

We have recently clarified our Technical Solutions on our webpage and wanted to post them here as well.

We welcome questions and comments.

-------------------------------------------------------

Engine/Power Plant Technology
The 2010 and 2011 versions of the LH3 and LH4 will showcase a 90 HP Diesel/BioDiesel engine currently rated at 90 MPG in Europe, mated in parallel to a 150 HP Hydraulic motor/pump and accumulator system. The parallel system will provide 0-60 MPH in less than 6 seconds, and full highway cruising speeds, with an estimated top speed of 110 MPH.

By 2012, Lightning Hybrids will offer an exclusive new engine currently under development. The specific design details are still secret, pending US and international patent filings. Several patent filings are underway, the most significant attributable to Sam Johnson's design of an integrated hydraulic axial piston engine. Specific features of the power drive-train are as follows:
• 100 HP and 100 Lbs
• biodiesel or diesel
• true cylinder deactivation for high part load efficiency
• no transmission
• no valves, flywheel or crankshaft weights
• 150 MPG

Hydraulic Storage Technology
A small carbon fiber accumulator operating between 5000-7000 psi will provide for braking recovery energy storage, and will provide power for a full throttle launch to 60 MPH in under 6 seconds.

Vehicle Chassis
Conventional frame design techniques fabricated from chrome molybdenum tubing provide the major structural elements. By the 2012 model year, we expect to replace all metal with Carbon Fiber, to further reduce weight and increase structural stiffness.

Vehicle Shell and Aerodynamics
Lightning Hybrids has developed a unique and ultra-fast design to prototype process. By leveraging CAD and CAM systems throughout the entire design process, a large 5-axis Router, and a proprietary approach to molding and layup, LHI can go from designing to having production body parts in less than a week. This allows for ultra fast design iteration, and the ability to develop a variety of options and configurations, with a relatively small investment.

New Photos

2009-03-13T19:36:00.000-07:00

The plug for the LH3 belly pan.

Eddie loves to weld stuff.

The LH4 chassis with it's fancy paint job and part of the drivetrain.
Fixing the router.

Up soon: finished carbon fiber body parts and an answer to the most asked question of the week... how will the door work in rain?

Updates

2009-03-11T18:49:00.000-07:00

Everyone on staff (paid and volunteer) is working night and day right now. Random updates for you today:

- 20 days until the Denver Auto Show...

- We have some new images of the LH3. You can check them all out here.

- The body molds are all being finished and should be in the shop next week, which means we can assemble the car next week. We can barely contain ourselves we are so excited!

- The drivetrain is being put together. We will probably keep it out of the car for the auto show so we can use it for demonstration purposes. Can't wait to fire it up!

- We have had a ton of online media attention recently - most notably Wired and Gas2.0. There were a lot of other hits, but those were the only two that actually called for interviews and made sure all of their info was spot on. Welcome if you are coming from those blogs! We'd love your feedback and comments.

- Tomorrow morning we will be hosting one of Denver's favorite "roving reporters" Chris Parente from KWGN Channel 2. He is going to do five live spots with us - 6:40, 7:20, 7:50, 8:20 and 8:50 - it's going to be an early morning for us... We are going to show him how the LH4 body has been created and have him do some work on the router and the welder - tune in and check out our toys!

- Sign up for our enewsletter - we will send you updates and alerts as well as invitations to our open house and other events. (Sorry we can't do tours right now.)

T-Shirt

2009-03-11T17:22:00.001-07:00

Not only will we be unveiling our car at the Denver Auto Show, we will also be offering a Premier Edition Lightning Hybrids Official T-shirt. You will have to stop by to see the cool design we have worked out for the shirt. By the way, what is your cost threshold for a good quality collector edition t-shirt? $25? $30? More? Less?

Monday's post offered a free t-shirt to the first five readers who could guess what car the LH4 was loosely modeled after. We have five winners who all guessed the 1963 Chevrolet Corvette. If you are a winner please email bonnie at lightninghybrids dot com - otherwise we can't track you down...

Thanks for commenting - as always, we will be sure to answer any questions you have on the blog as soon as we can.

More Molds

2009-03-09T19:07:00.001-07:00

The rear mold is finished and ready to go out to EBS Carbon Inc.

Free t-shirt to first five people leave a comments with correct make, model and year of the car the LH4 body was loosely modeled after.

Finally, A Real Logo!

2009-03-03T20:43:00.001-08:00

We have finally finished work on a logo for the company. What do you think?

We have been working with a few different designers on it since November and haven't been able to come up with one that everyone could agree upon. Until out of the blue, Anthony Toddy emailed me a design and after a few revisions, we are all happy with it!

As with any logo you can expect it to change over time, but for now we are plastering it everywhere. Can't wait to see what it looks like on the seat covers...

The One With the Chain Saw

2009-03-01T21:20:00.000-08:00

What? Like you've never wanted to take a chain saw to your car... come on now. Be honest.

Yes, that's Dan taking a chain saw to the mold for the top of the car.

We're working on getting all the mold parts on and fitting correctly so that we can see how the body profile looks. It is great to see it come together in 3-D after all that time looking at it on the computer.

Dan doing a test drive, this time with the car body. Pretty soon we will put them both together...
We're really pleased with the way the lines look. What do you think?

Nice Body!

2009-02-27T09:37:00.000-08:00

Car body that is...

The body molds for the LH4 are coming together nicely. It is actually starting to look like a car. Take a look for yourself:

What you see is are the foam molds that will be used to make the plugs that will in turn be used to make the actual carbon fiber body of the car.

We're taking suggestions for color - how do you think we should paint it?

Only 32 days until our unveiling of the LH4 at the Denver Auto Show!

The Engines and the Front End Body Mold

2009-02-21T22:32:00.001-08:00

It was another busy week in the shop with everyone working long hours. We're happy to report that progress was made on the prototype engines and on the front end molds.

Prototype engine 1 - as it was when we got it from a junk yard in Germany:

The same engine after cleaning, sandblasting and painting:

Ed getting the engine work done:

The front end mold and preparation for creating the plug for the carbon fiber body:

Have a question about Lightning Hybrids or our cars and technology? Leave us a comment and we will answer it in an upcoming post.

Another Article

2009-02-20T22:14:00.000-08:00

We were mentioned today in the Loveland Connection - check it out here.

-----------------------------------

Pictures of progress coming soon.

In the meantime, here is one of the new renderings of the LH4. Notice how it has no outside mirrors?

In order to achieve 100 MPGe + on the highway drag must be minimized, and mirrors are a major source of both drag and wind noise. Oh, don't worry - you will still be able to see who is following you through the use of a camera and view screen system located in the interior where you normally peer outside the window to look in the mirror. Not only does this reduce drag and noise, it also provides some intriguing options for zoom, capture, and accident avoidance systems.

9News Story

2009-02-16T21:43:00.000-08:00

We were just featured on 9News (NBC - Denver)! Check out the story here.

Test Drive

2009-02-13T16:44:00.001-08:00

Dan Johnson, Lightning Hybrid's CEO, took the LH4 for a test drive.

Only 46 more days to the Auto Show...

Here's the link to the Northern Colorado Business Report article that ran today.

Busy Week

2009-02-12T13:12:00.000-08:00

It's been a busy week here. Between getting body molds underway and hosting an anchor from one of the biggest news markets in the region, there has been someone in the shop 24 hours a day for the past week

The chassis is complete and the engine is mounted. Here's a picture. It is no longer supported by the chain you see. The wood that you see shows the profile of the hood.
Also we have a mold! Below is a picture of the mold for the undercarriage body mold. One of the ways we are increasing aerodynamics is to have a smooth underside. This mold will be used to make the plugs which will then be used to create the actual carbon fiber car panels.

We also painted the lobby and some of the office spaces - it looks much more welcoming. Just in time to host Shawn Patrick, weekend anchor and reporter at 9News (Denver's NBC affiliate). They were here for over an hour and took lots of footage. As soon as we know when the spot will air we will post the info here.

And, if you are wondering... Yes, we are aware that the Denver Auto Show is only 47 days away. And yes, we will have a car ready by then!

In the News

2009-02-09T18:34:00.000-08:00

Lightning Hybrids will be featured soon by two different media sources. Check the "Lightning Hybrids In the News link to the right for updates.

-----------------------------------------

Last week Kristen Tatti from the Northern Colorado Business Report was here to interview CEO Dan Johnson. The article will run in the February 13th edition and we will post a link here when it is published.

----------------------------------------

This week Shawn Patrick a reporter and weekend anchor at 9News (Denver's NBC affiliate) will be visiting Lightning Hybrids to interview our engineers and take footage of the car (we have a rolling chassis now) and shop (we will be showing off our new router). Check back this weekend to see the story.

It's Official

2009-02-02T09:19:00.000-08:00

Lightning Hybrids is an official contender in the Progressive Automotive X PRIZE!

In March of this year, the X PRIZE Foundation and Progressive Insurance jointly announced the $10 million dollar Progressive Insurance Automotive X PRIZE. This competition invites teams from around the world to focus on a single goal: design viable, clean and super-efficient cars that people want to buy.

And Lightning Hybrids is going to be one of those teams.

We are excited to participate in this competition with our revolutionary automotive technologies. If you are reading our blog you already know that we have developed a unique and patent-pending biodiesel-hydraulic hybrid vehicle which emphasizes thermodynamic and hydraulic system efficiencies, lightweight mechanical and composite structures, and sports car styling. We know these vehicles can win this competition and look good doing it.

The X PRIZE race will take place in the late summer of 2010 - a little over a year from now and we have an aggressive plan to win. This is a great opportunity for us to be part of an international event, with significant public exposure and promotion to potential partners, sponsors, investors, manufacturers, distributors and customers.

The competition has tough entrance requirements, stringent judging criteria, and race courses that test and reward manufacturability, marketability, safety, durability and performance. Our vehicles are designed to excel in every one of those areas.

Check back often to learn of our progress towards winning the Progressive Automotive X Prize.

Return to Lightning Hybrids main site.

Rev It Up!

2009-01-26T21:27:00.000-08:00

At long last, we received our two diesel engines from the UK. We had to search high and low to find the right engines for our prototypes because of the unique features of our hybrid.

It was incredibly important for us to find the perfect engines for testing target weight, performance, size, etc. We finally found them in Germany and purchased them from Volkswagen.

What with international delivery and language barriers, the delivery process was longer than expected. So we are quite pleased at their long anticipated arrival.

As for further updates; the chassis is roughly eighty five percent completed, and we hope to have it finished by Friday. Pictures to come!

Do You Ever Wonder What Those Odd Things Are When You See Them Rolling Down the Highway?

2009-01-23T18:56:00.000-08:00

Well, now you know - it is a router. As mentioned before it will allow us to cut our own vehicle body molds and parts.

We are excited that our router arrived today! It is brand spanking new and comes from DMS, a Colorado Springs-based manufacturer.

It only took dismantling the door, several hours of unloading, maneuvering and situating to get it into place.

Thankfully the shop is now clean and looking good enough to sport such a great piece of equipment!

(Don't worry we're still planning to have a carbon-fiber vehicle body. We just HAD to try out our new toy, er tool with some random scraps of wood we had.)

One delivery down... we're still waiting on our European VW engines...

Return to Lightning Hybrids main site.

Green Tech Slide Show

2009-01-21T17:02:00.000-08:00

Tim Reeser, our Chief Sales and Marketing Officer recently presented this slide show to the Colorado Green Tech January meeting. Check it out -- lots of great images and the Lightning Hybrids business plan in a nutshell.

Lightning Hybrids presentation to Colorado Green Tech Meetup

View more presentations or upload your own. (tags: hybrid hydraulic)

Return to Lightning Hybrids main site.

New Toy, er Tool

2009-01-16T07:19:00.001-08:00

After a great deal of discussion and negotiation, we are excited to announce that we have ordered a large 5-axis CNC router that will allow us to cut our own body molds and parts. Our machine is coming brand new from DMS, a Colorado Springs-based manufacturer, and will be delivered on the 24th.

Unlike nearly all the other up and coming Green Tech automotive companies, we will make all our own prototype tooling, molds, and parts, as well as our own production molds. The investment in these tools and skillsets will give us much faster time to market and ultimate control of timing and urgent schedules.

The frame build on the first 4-wheel prototype has begun. We expect to have pictures of it for the blog by the 26th.

Return to Lightning Hybrids main site.

Denver Auto Show

2009-01-14T07:22:00.000-08:00

You will be able to take a look at our vehicle prototypes at the Denver International Auto Show taking place in early April of this year. We are excited to be rolling out the cars for their first public appearances.

We heard yesterday that the Denver International Auto Show will be headlining our car on all their marketing materials!

The marketing folks behind the show were so impressed with our cars' look and body lines, that they asked us if they could use our pictures as a lead throughout their marketing!

So mark your calendars to come see the cars (and meet us!) at the Denver International Auto Show running from April 1 to 5, 2009, at the Colorado Convention Center. Can't wait to see you there!

Return to Lightning Hybrids main site.

Set Up Shop

2009-01-09T07:06:00.000-08:00

We have completed 3 weeks of extensive shop setup, running 3-phase electricity, compressed air, and setting up benches, tools, welders, CNC equipment, and material handling systems.

We have twelve thousand square feet in our new garage and office space. (Pictures coming.) The building is a nearly 100-year-old structure in downtown Loveland that has most recently been used as an automotive shop, so we had hoped that at least the basic infrastructure for the Lightning Hybrids space would be in place, but unfortunately that was not the case.

Nevertheless, we are excited about the functionality, location, and usefulness of the space. We have also completed the full-scale tear-apart of a gorgeous Mazda Miata that is serving as our chassis donor car. It has been hard to disassemble such a beautiful running car that did not have a scratch on it. Anyone need a 2006 Miata engine, transmission or body parts? The initial Pro/E designs of the 3 and 4-wheel cars are both nearing completion.

Return to Lightning Hybrids main site.

Lightning Hybrids

New Lightweight Accumulators

REEL BIZ Video

NTEA Work Truck Show Pictures

New Video

Hydraulic Hybrid Systems - VCIR Technology Showcase

Lightning Hybrids Receives Larimer County Workforce Center Grant

Major New Federal Incentives for Fleet Vehicles Likely

Hydraulic Hybrid Prototyping

Lightning Hybrids and HHS to Apply for Patents

We've Moved!

Lightning Hybrids and the X PRIZE

Lightning Hybrids to Raise $1.5 Million in Capital Through One-Year 10% Secured Notes

Lightning Hybrids to Raise $1.5 Million in Capital Through One-Year 10% Secured Notes

HHS Retrofit Pilot Project

Welcome to Hydraulic Hybrid Systems' Blog

PRESS RELEASE: Hydraulic Hybrid Systems and Equipment Maintenance Innovators Announce Partnership

Current Engineering Projects

Northern Colorado Entrepreneurs Network Presentation

Hydraulic Hybrid Systems, LLC

Facebook

More Videos

Q&A: Doubling Prius' Gas Mileage

Fleet Retrofit Pilot Project

Q&A: Leaks in the Hydraulic System

Q&A: Pneumatic Hybrid

Q&A: Hydraulic Hybrid Systems

Q&A: Vehicle Pricing and Warranties

Engineering TV Series Complete

Job Creation Incentive from the City of Loveland

Open House

LH4 Maiden Voyage Video

Maiden Voyage Photos

The Tadpole

Safety Dance

Q & A

FRED

Keep Our Router Busy

Body Work

It's Electric

Guest Blogger: Sam Johnson

We Survived

Free T-Shirt?

TAA DAAAA!!!

Denver Auto Show Set-up

More News

Want One?

News Coverage

Over the Hurdle

Animated Clips

Three Days, Part II

Three Days, Part I

Spring Snow

One Week

X PRIZE Update

Lightning Hybrids Technical Solutions

New Photos

Updates

T-Shirt

More Molds

Finally, A Real Logo!

The One With the Chain Saw

Nice Body!

The Engines and the Front End Body Mold

Another Article

9News Story

Test Drive

Busy Week

In the News

It's Official

Rev It Up!

Do You Ever Wonder What Those Odd Things Are When You See Them Rolling Down the Highway?

Green Tech Slide Show

New Toy, er Tool

Denver Auto Show

Set Up Shop